The most visible steel building in our Atlanta file was a fast-track job. National Construction Labor LLC needed a sales and design center for what Kenneth E. Vogan, P.E. described as the tallest residential building to date in downtown Atlanta, and he wrote that a pre-engineered metal building is what let them fast track it. The answer was a 35 by 98 foot pre-engineered building standing 20 feet high on a 0.5:12 low-slope roof. As the tower’s designers kept refining the look they wanted, the exterior of the sales center changed with them, and Vogan wrote that this flexibility is what let the project finish on time. Our second Atlanta project is far simpler: a metal roof system for Scott Darnell, who wrote that the building shipped in six weeks as promised and that he could not believe how easily it went up. Around the city the published record keeps going. In Milton, at the north end of Fulton County, Astra Group ordered a 35 by 78 foot specialty building on a 6:12 pitch with two 20 by 30 additions. Colleen Phillips put up a 60 by 120 foot garage in Newnan, Tom Stevens added a 30 by 40 workshop in Dallas, and Patrick and Melissa Taylor built a brick-front workshop in Carrollton. If your project is a showroom, office, or warehouse, our commercial steel building options are the place to start, and you can browse every Georgia project on the state hub.
What a downtown sales center, a roof system, and a ring of suburban projects say about building steel in metro Atlanta.
The downtown sales and design center kept changing on paper as the tower designers refined the look they wanted. Vogan credited the flexibility of a pre-engineered metal building for letting the exterior follow those changes while the project still finished on time.
The Georgia Department of Community Affairs adopted the 2024 International Building Code with Georgia Amendments as the mandatory building code, effective January 1, 2026. Our in-house engineers work to that edition and deliver drawings with load calculations for the City of Atlanta or your county permit office.
The sales center runs a 0.5:12 commercial roof with a 20-foot height, while the Milton specialty building climbs to 6:12. Roof pitch, eave height, and door layout are design decisions you make with us, not limits of a stock catalog building.
Downtown work sits inside I-285, but much of our metro record lies beyond it: Milton in north Fulton, Newnan in Coweta County, Dallas in Paulding County, and Carrollton in Carroll County. Freight is quoted to your exact job site wherever it falls.
Commercial work leads the published Atlanta record, but every MBMI category ships to Fulton, DeKalb, Cobb, Gwinnett, and the rest of the metro.
The 35 by 98 downtown sales and design center shows how a pre-engineered commercial shell can carry a custom exterior. Offices, showrooms, and warehouses follow the same engineered approach.
The 30 by 40 Dallas workshop has two 12 by 12 roll-up doors, and the Carrollton workshop wears a brick front. Contractor shops and home garages around the metro use the same frame.
Colleen Phillips stores her toys in a 60 by 120 foot, 17-foot-high Newnan garage finished in Burnished Slate and Light Stone. RVs and boats headed for Lake Lanier get the same tall, wide bays.
Clear-span framing opens a sanctuary or fellowship hall without interior columns. Congregations across Fulton and DeKalb can plan seating, stage, and parking around one open room.
Hay barns, equipment sheds, and livestock shelters for farms on the metro edge, from Coweta to Cherokee County, sized to the tractor and the herd rather than a stock box.
Horse properties on the metro edge can cover a riding surface with a column-free arena and add stalls or lean-tos to the same engineered drawing set.
Planning a building the public will see every day? Our article on designing commercial metal buildings that look good covers facades, trim, and finish choices.
Every photo is a published MBMI customer project in Atlanta or the surrounding metro. Click through for the full story and building specs.
The same four steps carried the downtown sales center, the Darnell roof system, and the suburban shops around them.
Tell us the size, use, and address. MBMI quotes are written to be easy to understand, include freight to your Atlanta-area site, and include every accessory you ask for.
Our in-house engineers size the frame to Georgia code and your site’s loads, then send detailed drawings, load calculations, and an itemized parts list. Exterior changes are worked in at this stage.
Parts are manufactured at IAS-certified facilities to MBMA standards, labeled to match the erection drawings, and freighted direct from the factory to your site.
The owner arranges the foundation and erection crew, and the labeled parts and drawings guide the bolt-up. Darnell wrote that he could not believe how easily his building went up.
Published project pages across Georgia. Statewide coverage applies to every county, from the Atlanta metro to the coast and the mountains.
“The flexibility in design allowed by metal buildings, provided by MBMI, allowed us to make modifications to the exterior of the building as the designers made changes to achieve the look they desired for this highly visible upscale project. This flexibility allowed this project to be completed on time.”
“Doing business with MBMI was a breeze. The customer service was excellent. The building was shipped in six weeks as promised. I could not believe how easy the building went up. Thanks to MBMI for making this such a smooth process.”
“Working with Zach was great, he stayed on top of everything all the way up until the building was complete. Any issues were handled quickly and we think the building looks great, thanks MBMI”
From a downtown sales center to a suburban workshop, send us the size, use, and address. Your quote includes freight and the accessories you request, engineered to Georgia’s current code.
MBMI Metal Buildings
7499 W Atlantic Ave, Ste 208
Delray Beach, FL 33446
+1.800.293.2097
[email protected]
Weekdays 9am – 5pm
Georgia building requirements, including the 2024 International Building Code with Georgia Amendments, are listed by the Georgia Department of Community Affairs.
