MBMI Metal Buildings engineers custom steel buildings for every county in Georgia, whether the site is in downtown Atlanta, a Pooler retail corridor, a Blue Ridge mountainside, or South Georgia farm country. Our published Georgia work covers seventeen projects in sixteen cities, each manufactured at IAS-certified facilities to MBMA standards and shipped to the job site.
Seventeen published projects make Georgia one of the deepest states in our portfolio, and the variety is the point. In downtown Atlanta, National Construction Labor used a 35 by 98 foot building as the sales and design center for a residential tower. Down the coast, Yogesh Patel opened a 76 by 163 foot retail building in Pooler, just off the I-95 and I-16 interchange. In Commerce, a two-bay auto repair business added a 45 by 60 foot shop, 18 feet high with three 14 by 14 roll-up doors. Up in the northwest corner of the state, a Trenton owner built a 50 by 100 foot industrial building in Dade County. Colleen Phillips stores her toys in a 60 by 120 foot Newnan garage, Ron Lee finished a 40 by 60 garage in Gainesville with 6-foot overhangs, and Rick Martinez put up a 50 by 50 storage building in Baxley in Aztec Gold and Light Stone. The mountains add a Blue Ridge barndominium, an Ellijay shop, and a llama barn in Young Harris. Every one of those frames was engineered to the code and loads at its own address, because a building on the Atlantic coast and one in the Blue Ridge face very different weather. Most Georgia buyers start with our commercial metal building options or our steel garages and shops.
Four reasons Georgia buyers from the coast to the Blue Ridge build steel with MBMI.
The Georgia Department of Community Affairs adopted the 2024 International Building Code with Georgia Amendments as the mandatory building code, effective January 1, 2026. Our in-house engineers design to that edition and deliver engineered drawings with load calculations.
Chatham County faces Atlantic hurricane winds; Fannin and Towns Counties sit high in the Blue Ridge. Every frame is sized to the wind and snow loads at its own job site rather than one number for the whole state.
Our buildings are manufactured at IAS-certified facilities to MBMA standards and made 100% in the USA, with shop-welded clips, pre-painted red iron, and clearly labeled parts that match the computer-generated erection drawings.
Painted panels carry a coating backed by a 40-year paint warranty against rusting, fading, and chalking. Premium lifetime fasteners go on every roof and wall panel, and base trim comes standard to seal out dust, water, and critters.
MBMI designs and engineers steel buildings for every county in Georgia. The cities below are featured highlights with published project galleries and local engineering details. If your Georgia city is not listed here, contact us directly for a quote; statewide coverage applies.
Every category below has published Georgia proof or ships statewide on the same engineered frame.
The Atlanta sales and design center, the 76 by 163 Pooler retail building, the 50 by 100 Trenton industrial building, and the Commerce auto repair addition with three 14 by 14 roll-ups.
Garages in Gainesville and Clermont, workshops in Dallas and Carrollton, and an Ellijay garage and shop. Ron Lee's 40 by 60 Gainesville garage adds 6-foot overhangs.
The 60 by 120 foot Newnan toy garage stands 17 feet high, room enough for campers, boats, and trailers headed to Lake Lanier, Lake Oconee, or the coast.
The Young Harris llama barn, a 50 by 50 storage building in Baxley, and a garage and shed in Marshallville show the farm side of our Georgia work, from the mountains to Macon County.
Clear-span sanctuaries and fellowship halls give Georgia congregations one open room for worship and events, engineered to the loads at each church site.
Covered riding arenas and stall barns keep Georgia horses and riders working through summer storms, with lean-tos added to the same engineered drawing set.
“We are very happy with the job that MBMI did for us. Their customer service was great, and our building is top quality steel workshop. Our building was delivered within six weeks as promised, and we could not be more pleased.”
“My experience working with MBMI was great. The delivery of my metal workshop was very fast, and the building looks awesome. I would recommend MBMI for anybody who is looking for a steel building in the near future.”
“I am extremely happy with the lean-to that I got through MBMI. It went up fast and easy, and it still standing strong. MBMI's customer service was phenomenal.”
Working out size, doors, and budget for a Georgia business? Our guide to planning a commercial steel building walks through the decisions in order.
Tell us the size, use, and job-site address. Your quote is written to be easy to understand, includes freight, and always includes the accessories you request, engineered for your Georgia county.
MBMI Metal Buildings
7499 W Atlantic Ave, Ste 208
Delray Beach, FL 33446
+1.800.293.2097
[email protected]
Weekdays 9am – 5pm
Georgia building requirements are set by the state minimum codes adopted by the Georgia Department of Community Affairs.
