MBMI Metal Buildings designs and engineers custom steel buildings for every county in New York State, from Staten Island and Long Island to the Hudson Valley, the Mohawk Valley, and the North Country. Fifteen published New York projects span fourteen cities, and every building is manufactured at IAS-certified facilities to MBMA standards and freighted to your site.
New York accounts for fifteen published projects in our portfolio, and together they read like a tour of the state. On Staten Island, a commercial owner built a 100 by 150 foot office and warehouse with a mezzanine and catwalk. On Long Island, the Manhasset-Lakeville Fire District added a maintenance building, and a Cutchogue owner put up a 190-foot-long warehouse on the North Fork. Up the Hudson, there is a maintenance building in Saugerties, a camp roof system in Wurtsboro, and a backyard shop at Greenwood Lake. Farther north, North County Building put up an 80 by 126 foot banquet hall and restaurant in Lyons Falls, a St. Johnsville owner built a 30 by 40 gambrel shop in Patriot Red and Polar White, and a helicopter operator finally got a hangar at its Harris base. Each of those buildings was engineered to the loads at its own address, which matters in a state where the code, the snow, and the wind all change between the boroughs and the Adirondacks. Our commercial steel building options and agricultural metal buildings cover most of what New York buyers order.
Four reasons New York buyers from the five boroughs to the North Country build steel with MBMI.
The five boroughs build under the NYC Construction Codes and the NYC Department of Buildings; the rest of New York uses the State Uniform Code. Our in-house engineers work to whichever applies at your address and deliver engineered drawings with load calculations.
From the Catskills to the Tug Hill country around Lyons Falls and the Adirondack towns near Essex, New York snow loads vary sharply. Every frame is sized to the snow and wind loads at its own job site rather than a statewide assumption.
Our buildings are manufactured at IAS-certified facilities to MBMA standards and made 100% in the USA. Each order arrives with shop-welded clips, pre-painted red iron, and clearly labeled parts that match the computer-generated erection drawings.
Painted panels carry a coating backed by a 40-year paint warranty against rusting, fading, and chalking. Premium lifetime fasteners go on every roof and wall panel, and base trim comes standard to seal out dust, water, and critters.
MBMI designs and engineers steel buildings for every county in New York. The cities below are featured highlights with published project galleries and local engineering details. If your New York city is not listed here, contact us directly for a quote; statewide coverage applies.
Office & Warehouse · Staten Island
Workshop · Staten Island
Fire District · Manhasset
Warehouse · Cutchogue
Maintenance · Saugerties
Roof System · Wurtsboro
Backyard Shop · Greenwood Lake
Banquet Hall · Lyons Falls
Gambrel Shop · St. Johnsville
Helicopter Hangar · Harris
Garage · Argyle
Barn · Essex
Every category below has published New York proof or ships statewide on the same engineered frame.
The Staten Island office and warehouse, the 40 by 190 Cutchogue warehouse, and the 80 by 126 Lyons Falls banquet hall and restaurant, which its builder called not your run of the mill steel building.
The St. Johnsville 30 by 40 gambrel shop and the Essex metal barn show the upstate farm side of our New York work, from the Mohawk Valley to the Lake Champlain shore.
A garage in Argyle, a workshop on Staten Island, and the Greenwood Lake backyard shop. The Argyle owner wrote that MBMI handled the entire transaction quickly and professionally.
Clear-span assembly framing for sanctuaries and fellowship halls. The same construction produced the 50 by 60 Harris helicopter hangar and the 50 by 100 Wurtsboro camp roof system.
Enclosed bays and open roof systems for boats, campers, and trailers anywhere in New York, sized to height and length so they can sit out the winter under a roof.
Clear-span indoor arenas keep riding surfaces column-free through a New York winter, with stall barns or lean-tos added to the same engineered drawing set.
“This project was not your run of the mill steel building. The structure had many different elements in the design that made it fairly complex. MBMI’s attention to details in the design process made it come together flawlessly.”
“We got the hangar CO the first week of October. We were the last of our 13 New York bases to get a hangar!”
“Dealing with you and the staff at MBMI was awesome, and our building is great. We certainly would recommend you guys to anyone looking for a steel building.”
Getting ready to request pricing? Our checklist on what to have ready for an accurate steel building quote saves a round of back-and-forth.
Tell us the size, use, and job-site address. Your quote is written to be easy to understand, includes freight, and always includes the accessories you request, engineered for your New York county.
MBMI Metal Buildings
7499 W Atlantic Ave, Ste 208
Delray Beach, FL 33446
+1.800.293.2097
[email protected]
Weekdays 9am – 5pm
New York State building requirements outside New York City are maintained by the NYS Division of Building Standards and Codes.